KW Variant 2 Coilovers - For the Experienced Driver
The KW Variant 2 is the system intended for the experienced driver who requires to not only determine the individual lowering of their vehicle, but adjust the damper setting to fine tune the system to their needs. The adjustable rebound damper allows adjustment of the pitch and roll behavior of the vehicle, adapting it to one's own driving preferences.
Rebound adjustment can be performed via an adjustment spindle on the end of the piston rod. The rebound damping primarily, controls pitch and roll of the vehicle, especially in the low speed damping range which directly influences handling and comfort. Therefore vehicle can be adjusted to the needs of the driver, making the ride variable from comfortable to sporty and stiff, both with improved road handling.
About KW Coilover Systems: KW Coilover systems are a combination of lowering springs and specially tuned, shortened shock absorbers that have been coupled with engineered threaded strut housings that allow you to lower your vehicle within a specified range using the adjustable aluminum spring perches.
All new KW Coilover systems are constructed using the new stainless steel INOX-line strut housings that provide the ultimate in corrosion resistance, guaranteeing functionality for the life of the vehicle. By far the best quality available.
The innovative, integrated KW solutions allow you to lower your vehicle within a safety tested TV-approved height range. (TV testing is required by the German government for any modification to your vehicle. Each KW system is individually tested and TV-approved to be equal to or greater than the factory components, and when used properly does not adversely affect your vehicle). This means sporty driving and stylish appearance while maintaining ride comfort.
Detailed Fitment Chart (Locate Part Number for Ordering)
|
Vehicle Model
|
Model Year
|
Lowering in Inches
|
Part Number
|
Footnotes
|
|
Front
|
Rear
|
|
Boxster (986) & Boxster S
|
98-04
|
0.8-1.5
|
0.8-1.5
|
15271001
|
1, 35
|
|
All other Models Available in KW Variant 3
|
n/a
|
n/a
|
n/a
|
n/a
|
n/a
|
Footnotes:
1. Height adjustable on the front and rear axles (threaded strut housings)
35. Only for vehicles manufactured after 1998. Model year can be found in the 10th position of the vehicle identification number (V=97, W=98, X=99, Y=2000, 1=2001…)
54. Only for vehicles without air suspension
56. For vehicles with upper supporting bearing 99633301190 the KW supporting bearing adapter set must be used. (KW part-no.: 685 10 036)
Note: Price is for the full suspension kit, all 4 corners.
Contact Us for Discounted Pricing!
|