Our double walled exhaust tips are made from high quality T304 stainless steel and hand crafted with high luster polish. These are extremely high quality tips. Our Eurosport Design exhaust tips have become popular all over the world. We have both flat and slanted tips available. These are perfect for customers that still have there original exhaust but want to get rid of the original factory tips. These give you the option of having aggressive exhaust tips, without a loud performance muffler. Or they can be installed on any aftermarket exhaust.

 

These tips are 3 inches wide (76mm), 6 inches long, with a 2 1/4 inch inlet. Many aftermarket exhaust systems come standard with 76mm tips. These are universal tips, minor modifications may be required depending on your specific vehicle model.

 

 

 

1. Remove the factory tips by drilling out the 3 rivets on each tip. You may need to remove the bumper or rear diffuser to reach the top rivet on each factory tip. Some customers have been able to reach the top rivet without removing anything, we removed the bumper to make it easier.

 

2. The rear inlet on these new tips are the exact same size as the OEM tips. Once the OEM tips are removed they are a perfect fit and slide right on the OEM muffler. If you want these new tips to extend out from the muffler the exact same distance as the OEM tips you will need to cut about an 1" off the rear inlet of each new tip. However, some customers prefer the tips extending out the back slightly further than factory, this is the reason we make them slightly longer (no cutting is required).

 

3. In order to complete the installation drill the small holes in rear inlet of each new tip to match the holes on the OEM tips. Then you're ready to install the tips. Once installed the tips will slightly touch each other at the very back. On the E46 M3 (below) we installed these and this doesn't cause any problems, you can only tell the very back inside section of the tips are touching if you are looking from under the car. View the pictures below of the M3 with these (1145-F) tips installed.

 

This is a good DIY project. Of course any muffler shop could install these with no problems.

NOTE: Price is per single tip. International customers please email us for inexpensive shipping options. These have become very popular all over the world.

 

 

 

 

Flat Tip (#1145-F)

 

 

Flat Tips on E46 M3 (#1145-F)

 

 

Flat Tips on E46 M3 (#1145-F)

 

 

Slanted Tip (#1145-S)

 

 

Slanted Tips (#1145-S)

 

 

 

 

 

 

Part Numbers:

1145-F = Flat Tip

1145-S = Slanted Tip

 

 

NOTE: International customers please email us for inexpensive shipping options. These have become very popular all over the world.

 

Quantity:   Select 1145-F (Flat Tip) 1145-S (Slanted Tip) [+$3.00]